CAS CL series User Manual

8
8
2.10.3 List Cutting Hall (Menu code 1362)
(MENU → 3. PLU Date Table II → 6. Cutting Hall → 2. List )
1. Set the list range
• Set the list range to check
EX) Cutting Hall No.’s 1~10
• Press Print Key to List Cutting Hall No.'s on
screen.
After Cutting Hall No.'s are listed on the
screen, pressing the TEST key will print the
Cutting Hall No.'s.
Note: Printing should be done on continuous
label stock.
2.10.4 Delete Cutting Hall (Menu code 1363)
( MENU → 3. PLU Date Table II → 6. Cutting Hall → 3. Delete )
1. Enter cutting hall number to delete
EX) Delete cutting hall no. 1
Note: There is no confirmation request when
deleting a Cutting Hall No. Pressing the
PRINT key will cause the Cutting Hall No.
entered to be deleted.

CAS CL series Specifications

General

Brand	CAS
Model	CL series
Category	Scales
Language	English