QoS
DSCP Settings
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 166
9
• Queue — Displays the queue for which the queue settings are displayed.
The device supports four queues.
• WRR Weight — Indicates the WRR weight assigned to the queue.
• % of WRR Bandwidth — Indicates the percentage of bandwidth assigned
to the QoS queue.
STEP 2 Select whether traffic scheduling is based on either Strict Priority or WRR.
STEP 3 Click Save Settings. The queue scheduling settings are defined, and the device is
updated.
DSCP Settings
The
DSCP Settings Screen
contains fields for assigning packet DSCP tag values
to traffic queues.
To map DSCP values to queues:
STEP 1 Click QoS > DSCP Settings. The
DSCP Settings Screen
opens.
Figure 73 DSCP Settings Screen
To Next Page
Loading...
Need help?
General
