Setup
Network Settings
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 20
2
Network Settings
The
Network Settings Screen
contains parameters for configuring general device
information, including the system name, location, and contact, the system MAC
Address, System Object ID, System IP and MAC addresses.
To define the general system information:
STEP 1 Click Setup > Network Settings. The
Network Settings Screen
opens.
Figure 7 Network Settings Screen
The
Network Settings Screen
contains the following fields:
• System Name — Specifies the user-defined system name. The field range
is 0-160 characters.
• System Location — Specifies the user-defined system location, for
example, 3rd floor. The field range is 0-160 characters.
• System Contact — Specifies the user-defined system contact person. The
field range is 0-160 characters.
• System Object ID — Displays the vendor’s authoritative system object
identification.
• Base MAC Address — Displays the master unit’s base MAC address.
To Next Page
Loading...
Need help?
General
