Admin
Logging
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 246
13
The Query Parameters area contains the following fields:
• Interface — Specifies the interface for dynamic MAC addresses are
queried. The possible field values are:
-
Unit No.
— Indicates the stacking member on which the MAC addresses
are learned.
-
Port
— Indicates the port number on which the MAC addresses are
learned.
-
LAG
— Indicates the LAG number on which the MAC addresses are
learned.
• MAC Address — Specifies a MAC address to query.
• VLAN ID — Identifies the VLAN by number.
• Address Table Sort Key — Specifies the means by which the Dynamic
MAC Address Table is sorted. The address table can be sorted by address,
VLAN, or interface.
STEP 2 Define the relevant query filter fields.
STEP 3 Click Query. The Dynamic MAC Address Table is queried, and the discovered
MAC addresses are displayed in the Query Results Table.
Logging
The System Logs enable viewing device events in real time, and recording the
events for later usage. System Logs record and manage events and report errors
or informational messages.
Event messages have a unique format, as per the SYSLOG protocols
recommended message format for all error reporting. For example, Syslog and
local device reporting messages are assigned a severity code, and include a
message mnemonic, which identifies the source application generating the
message. It allows messages to be filtered based on their urgency or relevancy.
Each message severity determines the set of event logging devices that are sent
per each event logging.
In the
Logging Screen
, network administrators define the levels of event severity
that are recorded to the system event logs.
To Next Page
Loading...
Need help?
General
