Multicast
Bridge Multicast Forward All
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 215
11
Bridge Multicast Forward All
The
Bridge Multicast Forward All
Screen
contains fields for attaching ports or
LAGs to a device that is attached to a neighboring Multicast router or switch. Once
IGMP Snooping is enabled, Multicast packets are forwarded to the appropriate
port or VLAN.
To define Multicast packet forwarding to Multicast routers:
STEP 1 Click Multicast > Bridge Multicast Forward All. The
Bridge Multicast Forward All
Screen
opens.
Figure 98 Bridge Multicast Forward All Screen
The
Bridge Multicast Forward All
Screen
contains the following fields:
• VLAN ID — DIsplays the VLAN for which Multicast parameters are
displayed.
The configuration options are as follows:
• Static — Indicates the interface is user-defined.
• Dynamic — Indicates the interface is configured dynamically.
• Forbidden — Indicates the interface is not included the Multicast group,
even if IGMP Snooping designated the interface to join a Multicast group.
• None — The interface is not configured for Multicast service.
To Next Page
Loading...
Need help?
General
