Danfoss VLT AutomationDrive FC 301 Programming Guide

N O T I C E
This parameter is not visible via LCP.
The device identification parameter. The data type is array [n] of unsigned16. The assignment of the 1
st
subindexes is defined and
shown in the following table.
Index
Content
Value
[0]
Manufacturer
128 (for Danfoss)
[1]
Device type
1
[2]
Version
xxyy
[3]
Firmware date year
yyyy
[4]
Firmware date month
ddmm
[5]
No. of axes
Variable
[6]
Vendor specific: PB version
xxyy
[7]
Vendor specific: Database version
xxyy
[8]
Vendor specific: AOC version
xxyy
[9]
Vendor specific: MOC version
xxyy
Parameter 9-65 Profile Number
Table 560: Parameter 9-65 Profile Number
9-65 Profile Number
Default value: 0
Parameter type: Range, 0 - 0
Setup: All setups
Conversion index: 0
Data type: OctetString
Change during operation:
N O T I C E
This parameter is not visible via LCP.
This parameter contains the profile identification. Byte 1 contains the profile number. Byte 2 contains the number of the profile.
Table 561: Parameter 9-67 Control Word 1
9-67 Control Word 1
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: V2
Change during operation:
This parameter accepts the control word from a master class 2 in the same format as PCD 1.
Parameter 9-68 Status Word 1
Table 562: Parameter 9-68 Status Word 1
9-68 Status Word 1
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: V2
Change during operation:
This parameter delivers the status word for a master class 2 in the same format as PCD 2.
AU275636650261en-000101 / 130R0334 | 323Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English