Digi XBee User Manual

Technical specifications Networking and security specifications
XBee/XBee-PRO® S2C ZigBee® RF Module
17
Specification
XBee ZigBee S2C
XBee-PRO ZigBee S2C XBee ZigBee S2D
Dimensions
through-hole: 2.438 x
2.761 cm (0.960 x 1.087
in)
surface-mount: 2.199 x
3.4 x 0.305 cm (0.866 x
1.33 x 0.120 in)
through-hole: 2.438 x
3.294 cm (0.960 x 1.297
in)
surface-mount: 2.199 x
3.4 x 0.305 cm (0.866 x
1.33 x 0.120 in)
surface-mount: 2.199 x
3.4 x 0.305 cm (0.866 x
1.33 x 0.120 in)
Operatingtemperature -40 to 85 °C (industrial)
Antenna options
through-hole: PCB antenna, U.FL connector, RPSMA connector, or
integrated wire
surface-mount: RF pad, PCB antenna, or U.FL connector
Networking and security specifications
The following table describes the networking and security specifications for the devices.
Specification
XBee ZigBee S2C
XBee-PRO ZigBee S2C XBee ZigBee S2D
Supported network
topologies
Point-to-point, point-to-multipoint, peer-to-peer, and DigiMesh
Number of channels 16 Direct sequence
channels
15 Direct sequence
channels
16 Direct sequence
channels
Interface immunity Direct Sequence Spread Spectrum (DSSS)
Channels 11 to 26
Addressing options PAN ID and addresses, cluster IDs and endpoints (optional)
Communication interface specifications
The following table provides the device's communication interface specifications.
Interface options
UART 250 Kb/s maximum
SPI 5 Mb/s maximum (burst)

Digi XBee Specifications

General

Brand	Digi
Model	XBee
Category	Control Unit
Language	English