Digi XBee User Manual

AT commands Network commands
XBee/XBee-PRO® S2C ZigBee® RF Module
227
Parameter range
0x20 - 0xFF (x 100 ms)
Default
0x3C (60d)
NO(Network Discovery Options)
Set or read the network discovery options value for the ND (Network Discovery) command on a
particular device. The options bit field value changes the behavior of the ND command and what
optional values the local device returns when it receives an ND command or API Node Identification
Indicator (0x95)frame.
Parameter range
0 - 0x03 (bit field)
Bit field
Option Description
0x01
Append the DD (Digi Device Identifier) value to ND responses or API node identification
frames.
0x02
Local device sends ND response frame when the ND is issued.
Default
0x0
SC (Scan Channels)
Set or read the list of channels to scan.
Coordinator - Bit field list of channels to choose from prior to starting network.
Router/End Device - Bit field list of channels scanned to find a Coordinator/Router to join.
Write changes to SC using the WR command to preserve the SC setting if a power cycle occurs.
Parameter range
0 - 0xFFFF (bit field)
Bit field mask:
Bit Parameter
0 0x0B
1 0x0C
2 0x0D
3 0x0E

Digi XBee Specifications

General

Brand	Digi
Model	XBee
Category	Control Unit
Language	English