ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 127
Table 5.130 —Ethernet interface configuration mode commands, interface group
Command
Value/Default value
Action
multicast snooping max-
groups number
1-1000/-
Restrict the quantity of simultaneously viewed multicast
groups for the port.
no multicast snooping
max-groups
Remove the simultaneously viewed multicast groups quantity
restriction for the port.
multicast snooping add
name
name: 1..32 characters
Tether the selected multicast profile to the port.
multicast snooping remove
{name|all}
Remove multicast profile match to the port.
EXEC mode commands
All commands are available to the privileged user only.
Command line request in EXEC mode appears as follows:
console#
Table 5.131 —EXEC mode commands
Command
Action
show multicast snooping
groups count
Show information on the current registered group quantity for all ports, and the maximum
possible quantity.
show multicast snooping
profile [name]
Show information on configured multicast profiles.
5.18.5 RADIUS Authorization of IGMP Queries
This mechanism performs the IGMP query authorization with the RADIUS server. To ensure the
reliability and the load distribution, you may need multiple RADIUS servers. Servers for sending
authorization queries are selected randomly. If the server does not reply, it will be marked as 'temporary
down' and will not be used by the polling mechanism for the definite period of time, and the query will be
sent to the next server.
Received authorization data is stored in the switch's cache memory for the specific period of time. It
allows to speed up the following processing of IGMP queries. Authorization parameters include:
 MAC address of the client device
 Switch port identifier
 Group IP address
 Access decision—deny/permit
For Radius server configuration example, see Appendix A, Section 'Configuration of IGMP Query
Authorization via Radius Server'.
Global configuration mode commands
Command line request in global configuration mode appears as follows:
console(config)#
Table 5.132 —Global configuration mode commands
Command
Value/Default value
Action
ip igmp snooping
timeout : 0..10000
Set the lifetime in cache. If the value is equal to zero, lifetime

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English