128
Celerra Network Server Command Reference Manual
The nas Commands
nas_checkup
Provides a system health checkup for the Celerra Network Server.
SYNOPSIS
nas_checkup
[ -version | -help ]
DESCRIPTION nas_checkup runs scheduled and unscheduled health checks on the
Celerra Network Server and reports problems that are found, and the
actions needed to fix the problem and acts as a system health
monitor.
The scheduled run time for the nas_checkup command is every two
weeks by default. If a warning or error is discovered during this time,
an alert is posted on the Celerra Manager.
Set up e-mail notification for warnings or errors in the Celerra
Manager Notifications page, or modify and load the sample
nas_checkup event configuration file.
If a problem is discovered that requires EMC Service Personnel
assistance, nas_checkup will notify EMC.
OPTIONS No arguments
Runs a series of system health checks on the Celerra and reports the
problems that are found and the actions needed to fix the problem.
Note: No e-mail, callhome, or Celerra Manager alert is posted when the
health check is run unscheduled.
-version
Displays the version of health check that is run on the Celerra
Network Server.
-help
Provides help.
CHECKS Nas_checkup runs a subset of the available checks based on the
configuration of your system. The complete list of available checks
are:
Control Station Checks:
Check if minimum free space exists
Check if minimum free space exists ns
Check if enough free space exists
To Next Page
Loading...
Need help?
General
