Control Station
13
Overview
Control Station
The Control Station provides utilities for managing, configuring, and
monitoring of the Data Movers in the Celerra Network Server.
As the system administrator, you may enter commands through the
control station to perform tasks that include the following:
â—† Managing and Configuring of the database and Data Movers.
â—† Monitoring statistics of the Celerra cabinet components.
Accessing the
Control Station
You may use either local or remote access to the control station.
Local Local access of the command line interface is available directly at the
control station console.
Remote Remote access (through rlogin or telnet) using the command line
interface lets you use the Celerra Network Server command set.
Accessing the
Command Line
Interface
A description of how to gain local or remote access to the command
line interface for the Celerra Network Server follows.
Local For local access to the command line interface, at the prompt, log in
as nasadmin.
Remote For remote access to the command line interface:
1. Enter rlogin or telnet followed by the IP address of the control
station.
2. Log in as nasadmin.
You are now logged in at the command line interface.
To Next Page
Loading...
Need help?
General
