EMC Celerra User Manual

488
Celerra Network Server Command Reference Manual
The server Commands
server_vtlu
SYNOPSIS Configures a virtual tape library unit (VTLU) on the specified Data
Mover(s).
server_vtlu {<movername> | ALL}
-service <service_options>
| -tlu <tlu_options>
| -storage <storage_options>
| -tape <tape_options>
| -drive <drive_options>
| -help
DESCRIPTION server_vtlu creates, configures, and displays information on virtual
tape library units on the specified Data Mover(s). At this time,
server_vtlu supports only NDMP backups.
To get detailed options for VTLU service, TLU, storage, tape , and
drive, type -help for the full usage, or type only -service, -tlu, -tape,
and -drive respectively after typing the <movername>.
ALL executes the command for all of the Data Movers.
SERVICE OPTIONS -service {-info | -set -chain <chain_id>}
The -info option lists the chain IDs for the VTLU service on the Data
Mover. The -set -chain option specifies a <chain_id> for the VTLU
device connection. The default chain ID is 0.
TLU OPTIONS
-tlu
{-list
| -info <tlu_id>
| -new [-robot {[-vendor <vendor>][-product <product>]
[-revision <revision>]}]
[-slots <num_slots>]
[-impexp <num_impexp_slots>][-drives <num_drives>]
[-drive {[-vendor <vendor>][-product <product>]
[-revision <revision>]}]
| -modify <tlu_id>
{[-robot {[-vendor <vendor>] [-product <product>] [-revision <revision>]}]
[-slots <num_slots>] [-impexp <num_impexp_slots>][-drives <num_drives>]
[-drive {[-vendor <vendor>][-product <product>]
[-revision <revision>]}]}
| -delete <tlu_id>}
-tlu -list
Lists all of the VTLUs configured on the specified Data Mover(s).

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English