EMC Celerra User Manual

server_http
363
The server Commands
server_http
Configures the HTTP configuration file for Celerra FileMover for the
specified Data Mover(s).
SYNOPSIS
server_http {<movername> | ALL }
[ -info <feature> ]
| -service <feature> {-start | -stop}
| -service [feature] -stats [-reset]
| -modify <feature>
[-threads <threads>]
[-users [-valid|<user>[,<user>,<user>…]]]
[-hosts <ip>[,<ip>,<ip>…]]
| -append <feature>
[-users {valid|<user>[,<user>,<user>…]}]
[-hosts <ip>[,<ip>,<ip>…]]
| -remove <feature>
[-users valid|<user>[,<user>,<user>…]}]
[-hosts <ip>[,<ip>,<ip>…]]
DESCRIPTION server_http manages user and host access to a feature such as Celerra
FileMover, and determines the number of HTTP threads available to
take incoming service requests.
The ALL option executes the command for all of the Data Movers.
OPTIONS No arguments
Displays threads, hosts and users for all features on the specified
Data Mover, or all Data Movers.
[ -info <feature> ]
Displays threads, hosts and users for the specified feature. The valid
feature is dhsm.
-modify <feature>
Sets the HTTP protocol connection for the specified Data Mover with
the specified options. Any options previously set will be overwritten.
[-threads <threads>]
Sets the number of threads (default=20) for incoming service
requests. The recommended maximum is 30. The HTTP threads
are started on the Data Mover at boot time.
Changing the value of <threads> requires a reboot of the Data
Mover to take effect.

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English