S600 Instruction Manual
Note: Once you assign an F key to a display page, you cannot undo the
assignment unless you clear the SRAM or cold-start the S600.
However, you can always re-assign the F key to a different display
page.
5.7.6 Using the Exponential (EXPT) Key
The Exponential (EXPT) key allows you to enter parameters in
scientific notation.
S600 displays the value in scientific notation if it cannot display the
value as a normal number. Using the Config600 software, you can
force a data value to always display in scientific notation. For further
information, refer either to the Config600 Pro Software User Manual
(Form A6169) or to the on-line help for the Config600 software.
To enter an exponential value:
1. Key in a value.
2. Press EXPT (an E appears on the display) and then enter the
required power.
3. Press Enter.
For example, to enter the value 0.00000009 as an exponential value,
key in 9.0 or 9, press EXPT, enter 8 (to represent the power), and press
Enter to confirm.
Revised Jan-07 Front Panel 5-11
To Next Page
Loading...
Need help?
General