SC-S30600 Series Revision B
ADJUSTMENT Overview 199
Confidential
4.1 Overview
This chapter describes the Service Program software utility and the adjustment
procedures required after repairing or replacing certain parts.
4.1.1 Precautions
Always observe the following cautions whenever making an adjustment on the printer.
Always refer to “Adjustment Items and the Order by Repaired
Part” (p.200) and make sure to perform all the adjustments
listed in the table in the given order.
Always read and follow the precautions given in each section
that explains each adjustment. Ignoring the precautions can
result in malfunction of the printer.