Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
MAINTENANCE Cleaning 282
Confidential
5.5 Cleaning
5.5.1 Preliminary Check
PARTS TO BE CLEANED
Figure 5-4. Parts to be Cleaned
REQUIRED TOOLS
Table 5-2. Parts to be Cleaned
Parts to be Cleaned
Recommended
Cleaning
Frequency
Notes
1
 Platen Heater
 Pressure Roller
 Media holding plate
Every day
Clean when lint or dust of the media, or ink is
on.
2 Near Print Head Every week  Clean when head cleaning does not improve
print quality.
 Finish cleaning within 10 minutes to prevent
Print Head from drying out.
 Never touch the nozzle when cleaning the
Print Head.
3 Wiper Every week
4 Cap Every week
5 Wiper Rail Every week
Table 5-3. Cleaning Tools
Tool Purpose
Protective Glasses
(commercial item)
Protect eyes from ink and Ink cleaner.
Maintenance kit
(attached to this printer)
Gloves, Cleaning swab, Wiper, Wiper Cleaner, and Flushing
Absorber included.
Ink cleaner (consumable)
Clean the Wiper, Cap and its surroundings, or Print Head
and its surroundings when the ink cannot be removed with a
dry cloth.
Waste cloth
(commercial item)
Wipe off stains inside the printer.
Metallic or plastic (PP/PE) tray Place the used Cleaning swab or parts tainted with ink.
C A U T I O N
Placing used Cleaning swab or the like directly on the printer may
result in a permanent stain.

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English