Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
ADJUSTMENT Boards Related Checks and Adjustments 265
Confidential
4.14.2 MAC Address Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Connect the printer to the computer both with a USB cable and a network cable.
2. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
3. Start the Service Program and select MAC Address Input.
Figure 4-58. [MAC Address Input] Screen
4. Enter the MAC address indicated on the MAC address label attached on the rear of
the printer, and click [Write].
Figure 4-59. MAC Address Label
5. Click [Read] one time and check that the address you entered and that displayed
on the screen are the same.
6. Click [Finish].
7. Turn the printer OFF to finish the adjustment.
Rear of the printer
MAC address label

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English