Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
ADJUSTMENT Boards Related Checks and Adjustments 264
Confidential
4.14 Boards Related Checks and Adjustments
4.14.1 RTC&USB ID Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and select RTC&USB ID Input.
3. Check the Date and Time displayed, and correct them if necessary.
4. Click [Write RTC] to set the RTC.
5. Enter the 10-digit serial number of the printer to generate a USB ID.
6. Click [Write USB ID] to write the USB ID.
7. Click [Finish].
8. Turn the printer OFF.
9. Turn the printer on in the normal mode.
10. On the control panel, verify that the setting has been correctly applied.
If the setting is incorrect, set the date and time on the control panel.
11. Turn the printer off.
Figure 4-57. [RTC&USB ID Input] Screen
C A U T I O N
If the printer is turned OFF and back ON after changing the USB
ID, the computer (Windows) detects the USB port as a new port
and automatically copies the printer driver as xxxx (copy x). If you
need to perform another adjustment using this tool, select the
“copy x” driver.

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English