SC-S30600 Series Revision B
ADJUSTMENT Media Feed Related Checks and Adjustments 263
Confidential
4.13.3 Media Feed Auto Adjustment
PAPER USED
Size: 16 inches or longer
Type: 3M IJ40-10R
XECUTION MODE
Normal Mode
PROCEDURE
1. Load the paper into the printer.
2. Turn the printer ON.
3. Start the Service Program and select Media Feed Auto Adjustment.
4. Click [Run].
The adjustment pattern is printed.
Figure 4-55. [Media Feed Auto Adjustment] Screen
5. After the pattern is printed, the printer will automatically scan the pattern and carry
out the adjustment (no manual adjustment is needed).
6. Click [Finish].
7. Turn the printer OFF to finish the adjustment.
Figure 4-56. Adjustment Pattern
Required time is about 7 minutes.