Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
ADJUSTMENT Ink Supply Related Checks and Adjustments 257
Confidential
4.12 Ink Supply Related Checks and Adjustments
4.12.1 Ink eject
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Remove all the ink cartridges and lower the cartridge locks.
3. Start the Service Program and select Ink eject.
4. Select nozzles from which ink is ejected, and click [Run].
5. When finished, click [Finish] and turn the printer OFF.
Figure 4-48. [Ink eject] Screen
C H E C K
P O I N T
Time required for ejecting ink: about 4 minutes
C A U T I O N
Running the Ink eject function one time is not enough to prevent
ink from leaking when removing the ink tubes. Prepare paper or
cloth to wipe off leaked ink in advance or run the Ink eject function
twice in a row.

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English