EVS Multicam LSM User Manual

9. Advanced Control Modes
9.1. Paint Mode
9.1.1. Introduction
The Paint mode allows users to add drawings over the video. This is a software option,
which requires the license code 114 being installed. The functionality of this software
package can be operated using the tablet and the stylus. The normal pointing device is the
tablet.
You can change the Pointing device parameter in the Operational Setup menu (p.9.2 F2)
and toggle between the tablet.
The use of the Loop function allows the operator to record the effect back into the first
record channel of the server, and to create a clip with the paint feature. Rolling a clip while
in the Loop mode, in Painting, and dissolving paint image on/off allow for a very powerful
feature.
Warning
The Paint mode is not available on EVS servers:
• working with 10-bit codecs.
• running a 4K configuration.
OPERATION MANUAL Multicam LSM 12.05
9. Advanced Control Modes 181

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English