EVS Multicam LSM User Manual

Display Depending on the Load Playlist Setting
When the Load Playlist parameter is set to ‘Conditional’ in the Operational Setup menu on
the Remote Panel (P3.3 F2), the information displayed on the VGA Playlist Screen will
differ depending on whether a playlist is loaded on the PGM1 or not:
If a playlist is loaded on the PGM1:
• All the information displayed on the Playlist Screen refers to the loaded playlist.
• The PLAY, SKIP, NEXT and RECUE commands are displayed on the blue-
highlighted section at the bottom of the page.
If no playlist is loaded on the PGM1:
• The information displayed on the Playlist screen refers to the current playlist, except
the remaining time, which is not displayed.
• The PLAY, SKIP, NEXT and RECUE commands are NOT displayed on the blue-
highlighted section at the bottom of the page.
5.4.2. VGA Playlist Bank Screen
Pressing END on the keyboard when the Clip screen is displayed allows the users to
access the VGA Playlist Bank screen on the given page. This gives an overview on the
playlists and timelines stored on the bank.
82 5. Playlist Management
EVS Broadcast Equipment SA Issue 12.05.A- May 2014

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English