EVS Multicam LSM User Manual

8.3. Recalling and Playing Back a Remote
Clip
In the Remote Panel Interface
To recall/play back a remote clip, proceed as follows:
1. Select the Clip mode in the Network menu.
2. Select the remote LSM from the list. The LCD display returns to the normal mode.
3. Select the clip page 1, 2, 3 … to 10 (Page key). When selecting a server, it will
automatically reconnect to the page and bank that was last used.
4. Select the bank in which the desired clip is located
5. Choose the required clip (F1 - F10).
6. If all clips are present (from Camera A, B, C and D), they will appear in their respective
locations (Channel A, B, C or D).
The label of a remote clip is different in order to identify it easily among other clips:
176 8. Operation on XNet Network
EVS Broadcast Equipment SA Issue 12.05.A- May 2014

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English