RECORD
This key lights red when the system is recording. Pressing this key brings the system in
E/E (“live”) mode, and starts the record if necessary (depending on the settings of the
Setup menu). The E/E mode is actually playing pictures already recorded by the system,
and has a delay of 3 frames compared to the live source, on all audio and video tracks.
Page
Use this key to select a new clips page. After pressing the SHIFT+PAGE key, you must
press a F_ key to select the corresponding page (1 to 10).
PRVCTL
This function enables/disables the Preview Control mode.
2.3.5. Rebooting the System from the Remote
Panel
«Hard Reboot»
In the event that the system needs to be rebooted, the process can be accomplished from
the Remote Panel. Keep in mind that doing this while Multicam is running will of course
force the Multicam application to close abruptly, and up to 1 minute of the material being
recorded and not clipped could be lost.
To reboot, press the following key sequence,
Between step 3 and step 4, the RECORD button will flash GREEN and the PAGE button
will flash RED. Hitting the PAGE button will reboot the system. Hitting the RECORD
button will return to normal operation.
OPERATION MANUAL Multicam LSM 12.05
2. Working Interfaces 19
To Next Page
Loading...
Need help?
General
