Secondary Menu Without Keyword File Defined
If no keyword file is selected in the setup, the LCD display will be:
1keyword8901 2keyword8901 3keyword8901
111A
Push Aux Clip Sort->TC PostRoll
>Archive *** Search Cam
In this mode of the secondary menu, clips can still be directly recalled using the F1-F10
keys of the Remote Panel.
Secondary Menu With Keyword File Defined
If a keyword file is selected in the setup, the LCD display will be:
1keyword8901 2keyword8901 3keyword8901
F1:action_1 F6:action_6
F2:action_2 F7:action_7111A
F3:action_3 F8:action_8
F4:action_4 F9:p.01
F5:action_5 F0:Next page
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
In this mode of the secondary menu, the F1-F10 keys are used for keyword assignment,
and thus can no longer be used to recall clips. For a description of the keyword-related
functions, please refer to the “Keyword Management” Section of this manual.
The ID of the current clip appears on the end of line 3 of the LCD display.
4.2.2. Remote Panel Functions
Secondary Menu in Clip Mode
Push
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
The Push function allows you to easily send a copy of a clip to another machine on the
network, via the GbE network or the SDTI network.
• If one or two default targets (push machines) are defined in the setup, the clip will be
automatically sent to these machines.
OPERATION MANUAL Multicam LSM 12.05
4. Clip Management 39
To Next Page
Loading...
Need help?
General
