Frigidaire FFLE4033QW User Manual

131
Checks to perform:
Checks to perform:
E65
E65: High Limit Thermostat trip count is too high
E65
Excessive exhaust blockage, high limit thermostat defective and wiring failure.
WARNING
Check that all the connectors are correctly inserted
Clean the ventilation and repeat the Diagnostic Cycle to
check for any further alarms
Check the Inlet Thermal Limiter for the continuity?
NO
Replace the Inlet Thermal Limiter. Repeat the Diagnostic
Cycle to check for any further alarms.
Check whether the Exhaust vent system is proper
(there should not be any air blockage)?(See Fig.2)
Remove the air blockage and make the exhaust vent
system proper and repeat the Diagnostic Cycle to check
for any further alarms.
NO
Y
E
S
Replace/Repair the High Limit Thermostat and repeat
the Diagnostic Cycle to check for any further alarms.
Y
E
S
Check whether the ventilation of the dryer is proper?
(See Fig.1)
NO
Y
E
S
E67
E67: Heater Sensing failure
E67
Electronic Control Board defective
WARNING
Check that all the connectors are correctly inserted
Replace the Electronic Control Board and repeat the Diagnostic Cycle to check for any further alarms.

Frigidaire FFLE4033QW Specifications

General

Brand	Frigidaire
Model	FFLE4033QW
Category	Laundry Appliance
Language	English