56
10. Remove items when the
cycle is completed
a. For your safety, the lid is locked during the operation of
the washer. It will unlock at the end of the cycle, after the
tub has come to a complete stop.
b. To open the lid during the operational cycle, push in the
cycle selector knob to pause the cycle. You will hear two
beeps. Wait for the lid lock to release. Do not force open the
locked lid.
c. Place washed items in the automatic dryer, line dry, or
dry flat sections as directed in the fabric care label. Excess
wrinkling, color transfer or odors may develop in items left in
the washer after the cycle has ended.
7.2 Washing Cycle Selection
FFLE3911QW
FFLG4033QW
This manual covers many models and not all cycles, options,
or features listed are available on every model. Consoles
shown are for reference only. Your model may differ.
Turn the cycle selector in either direction to the cycle
required.
To change the cycle after it has begun, push in or turn the
cycle selector knob to pause the current running cycle.
Make the new selection and push in the cycle selector knob
again to start the new cycle.
CAUTION
To avoid serious injury, do not operate washer if
the safety lid lock is missing, damaged or operating
improperly.
To Next Page
Loading...
Need help?
General
