Fuji Xerox DocuCentreS2520 User Manual

8 Tools
138
Tools
8
List of Tools Menu Items Displayed in System Administration Mode
The table below lists the default settings you can change. The items displayed will vary
according to your machine's configuration.
Setting Item Description See Page:
System Settings Used to make system settings. P.140
Paper Tray Settings Used to make the paper type setting for a
tray.
P.140
Consumable Settings Used to set the alert/warning display for the
consumable.
P.141
Region & Timer Settings Used to set the machine's region of use and
system clock.
P.142
Other Settings Used to make other system settings. P.145
Network Settings Used to make network environment settings. P.147
IPv4 Address Solution Used to set IPv4. P.147
IPv6 Address Solution Used to set IPv6. P.148
IP Mode Settings Used to set the IP mode. P.148
Ethernet Rate Speed Used to set the transmission speed. P.148
IP Filter Settings Used to set IPv6. P.148
Copy Settings Used to make Copy feature settings. P.150
Lighten/Darken Used to set the default copy density value. P.150
Original Type Used to set the default original type value. P.150
2 Sided Used to set the default value for 2 sided
copying.
P.150
Paper Supply Used to set the default paper tray for
copying.
P.151
Reduce/Enlarge Used to set the default zoom ration. P.151
Edge Erase Used to set the value for Edge Erase. P.151
Sharpness Used to set the sharpness level. P.151
Background Suppression Used to set whether to remove the
background of an image.
P.151
Back. Suppression Level Used to set the background suppression level. P.152
Reduce/Enlarge Preset Used to set the preset reduction/enlargement
setting.
P.152
Auto Collation Used to set to rotate when Collated is
selected for output method
P.152
ID Card Copy Settings Used to make the ID Card Copy settings. P.153
Original Type Used to set the default value for the original
type.
P.153
Number of Cards Used to set the number of cards to be copied. P.153
Edge Erase Used to set the value of Edge Erase P.153
Scan Settings Used to make Scan feature settings. P.154
Lighten/Darken Used to set the default scan density value. P.154

Fuji Xerox DocuCentreS2520 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2520
Category	Printer
Language	English