8 Tools
158
Tools
8
3 Select [Multiple], and then press the <OK>
button.
4 Select [Confirm/Edit], and then press the <OK>
button.
5 Select the user to display or set, and then press
the <OK> button.
Note • You can also enter the two-digit number of
registered user to jump to the specified user.
Login Passcode
Used to display or set the passcode used to log in to the machine.
Note • You can enter between 4 to 6 numbers from 0 to 9.
1 Select [Login Passcode], and then press the <OK>
button.
The current passcode is displayed.
Note • To change the passcode, press the <C> (Clear)
button to erase the current passcode, and then
use the numeric keypad to enter a new
passcode.
2 Press the <OK> button.
Copied Impressions
Displays the total number of impressions the user has currently copied.
1 Press [Copied Impressions].
User Control
Multiple
Off
Single
User Management
Confirm/Edit
...
Reset Copied Impressions
...
User Control
...
Multiple
Confirm/Edit Jump to [_ ]
User 01
...
User 02
...
User 03
...
User 01
Login Passcode
...
Copied Impressions
...
Copy Limit (Unit: Impressions
...
)
User 01
Login Passcode
...
Copied Impressions
...
Copy Limit (Unit: Impressions
...
)
To Next Page
Loading...
Need help?
General
