Fuji Xerox DocuCentreS2520 User Manual

8 Tools
146
Tools
8
Job History Verbose
Sets the machine to record Copy and USB Scan jobs on the Job History Reports.
You can select [On] or [Off].
[Off] is set at the time of factory shipment.
Default Display
The [Default Display] screen lets you change the Default Display screen. The screen is
displayed at power ON and after returning from the Power Saver mode. You can select the
[Copy] screen or [Scan] screen as the Default Display screen.
[Copy] is set at the time of factory shipment.
Note • Some screens cannot be set on some models.
Follow the steps below to change the Default Display screen.
1 In the [Default Display] screen, select the screen
to use as the Default Display screen.
For information on how to display the [Default Display] screen,
refer to "System Settings Procedure" (P.136).
2 Press the <OK> button.
Enter Power Saver After Job Ends
Used to set whether to enter the Low Power mode 10 seconds after a print job is complete.
You can select [Off] or [On].
[Off] is selected at the time of factory shipment.
Note • The machine will follow the Low Power Timer setting when [Off] is selected.
Scan
Default Display
Copy

Fuji Xerox DocuCentreS2520 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2520
Category	Printer
Language	English