EasyManuals Logo
Home>Fuji Xerox>Printer>DocuCentreS2520

Fuji Xerox DocuCentreS2520 User Manual

Fuji Xerox DocuCentreS2520
257 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Supported Environment
29
Environment Settings
2
Using the Network connection
Scan with PC application
Uses the Network TWAIN (SOAP) to import scan data in a computer with a TWAIN or
Windows Image Acquisition (WIA) compatible application.
To use this function, you must install the scan driver from the Media (Software/Product
Manual).
Note To install the scan driver, follow the instructions provided in "Manual (HTML)" included in the Media
(Software/Product Manual).
For information on how to use this feature, refer to "Loading Scan Data Using the PC-Based Application" (P.120).
Scan to E-mail
Uses the SMTP protocol to send the document scanned by the machine as an e-mail
attachment.
To send scanned data as an e-mail attachment, you must activate the SMTP port.
(Setting at the time of factory shipment: Enabled)
This function is also used to set the e-mail header and body and SMTP server settings used
when e-mails are sent as well as the recipient address (system administrator's e-mail
address) for e-mail notification when a transmission error occurs.
For information on how to activate the SMTP port, refer to "Activating the Communication Port To Use" (P.36).
For information on how to set the SMTP server, refer to "SMTP Server Settings" (P.38).
For information on how to enter the header and body of an e-mail, refer to "E-mail Header and Body Settings" (P.39).
For information on how to set the system administrator's e-mail address, refer to "Administrator's E-mail Address" (P.44).
For information on how to use this feature, refer to "Sending Scan Data to PC as E-mail Attachment - E-mail" (P.121).
Scan to PC (Network)
Uses the SMB protocol to send the scanned data directly from the machine to the computer.
To save scanned data on a computer, you must activate the SMB port.
(Setting at the time of factory shipment: Enabled)
For information on how to activate the SMB port, refer to "Activating the Communication Port To Use" (P.36).
For information on how to use this feature, refer to "Sending Scan Data Directly from the Machine to the PC" (P.123).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentreS2520 and is the answer not in the manual?

Fuji Xerox DocuCentreS2520 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentreS2520
CategoryPrinter
LanguageEnglish

Related product manuals