4 Loading Paper
82
Loading Paper
4
Paper Types
This section describes the paper types supported by the machine.
Use of non-recommended paper types may result in paper jams, lower print quality,
malfunctions, or damage to the machine. To achieve optimum machine performance, use
only paper types recommended by Fuji Xerox.
If you desire to use paper other than the paper recommended by Fuji Xerox, contact our
Customer Support Center.
Important • Moisture generated by water, rain, or vapor may cause the printed images to fade. For more
information, contact our Customer Support Center.
Supported Paper Weights and Sheet Counts
*1 : When using 80 gsm paper
*2 : When using Fuji Xerox standard paper
Important • Paper jams may result if you attempt to print on a different paper type or size than the type or size
selected in the print driver, or from a tray that does not support the loaded paper. Select the correct
paper size, type, and tray to ensure successful printing.
Note • Basis weight is the weight of one sheet of paper of 1 m
2
in size.
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 x 1,091 mm) paper.
Supported paper sizes:
Maximum: A3, 11 × 17" (Non-standard size: 297 × 432 mm)
Minimum: A5 (Non-standard size: 98 × 127 mm)
Do not use conductive paper such as origami paper, carbonic paper or
conductively-coated paper. When paper jam occurs, it may cause short-circuit and
eventually a fire accident.
Paper Trays Basis Weight/Ream Weight
Loadable
Quantity
*
Paper Types
Tray 1 (Standard) 60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg
250
*1
sheets
(Up to 27 mm)
Lightweight (60-63
gsm)
Plain 1 (64-74 gsm)
Plain 2 (75-90 gsm)
Tray 2
(One Tray Module)
(Optional)
Trays 3, 4
(Two Tray Module)
(Optional)
60 to 216 gsm
Ream Weight: 51.6 - 186 kg
500
*1
sheets each
(Up to 54 mm)
Lightweight (60-63
gsm)
Plain 1 (64-74 gsm)
Plain 2 (75-90 gsm)
Heavyweight (91-
169 gsm)
Extra-HW (170-216
gsm)
Tray 5 (Bypass) 60 to 216 gsm
Ream Weight: 51.6 - 186 kg
100
*2
sheets
(Up to 10 mm)
To Next Page
Loading...
Need help?
General
