Fuji Xerox DocuCentreS2520 User Manual

Using CentreWare Internet Services
51
Environment Settings
2
 Configuration

Connection
[Enabled] is displayed.

Physical Connection
[Ethernet] is displayed.

Keep Alive Timeout
The keep-alive timeout period is displayed.

Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535).
You must set a unique number for each port. (Default: 80)

Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)

Title
You can select the display for the title displayed on a browser from [Internet Services] or
[Printer Model - IP Address].
 [Apply] button
You can apply changes by pressing this button.
Note • Reboot the machine to enable new settings.
Network TWAIN
You can set the Network TWAIN protocol.
 Configuration

Network TWAIN Port Status
[Enabled] is displayed.

Physical Connection
[Ethernet] is displayed.

Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
 [Apply] button
You can apply changes by pressing this button.
Note • Reboot the machine to enable new settings.
Defaults (Services > E-mail)
 General

Subject (Default: Scan Data from "model name")
You can enter the E-mail header (up to 128 ASCII code characters).

Message
You can enter the E-mail body (up to 256 ASCII code characters).

Maximum Attached Size (Default: 20MB)
You can set the maximum file size between 2 and 20 MB to attach to an e-mail.

Fuji Xerox DocuCentreS2520 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2520
Category	Printer
Language	English