2 Environment Settings
28
Environment Settings
2
Supported Environment
This section describes the environment settings needed to use the machine's print and scan
features.
Print Feature
The machine can be connected directly to a computer for use as a local printer, or can be
connected to a network for use as a network printer.
Use as a Local Printer
Connect the machine to a computer with a USB cable.
Use as a Network Printer
Print from network-connected computers using the TCP/IP protocol.
To use the machine as a network printer, you need to activate the port to use for printing.
LPD: Activate this setting when using the LPD port.
Port9100: Activate this setting when using the Port9100 port.
For information on how to set TCP/IP, refer to "Setting the Network Environment" (P.32).
For information on how to activate a communication port, refer to "Activating the Communication Port To Use" (P.36).
Scan Feature
The machine supports the following Scan functions:
Using the USB connection
Scan with PC application
Uses the USB connection to import scan data in a computer with a TWAIN or Windows
Image Acquisition (WIA) compatible application.
To use this function, you must install the scan driver from the Media (Software/Product
Manual).
Note • To install the scan driver, follow the instructions provided in the "Manual (HTML)" included in the
Media (Software/Product Manual).
For information on how to use this feature, refer to "Loading Scan Data Using the PC-Based Application" (P.120).
Network Connection
LPD / Port9100
Local Connection
USB
To Next Page
Loading...
Need help?
General
