Fuji Xerox DocuCentreS2520 User Manual

Using CentreWare Internet Services
47
Environment Settings
2

Dynamic DNS Registration (IPv6)
Sets dynamic updating of the IPv6 DNS server. Checking [Enabled] enables dynamic
updating of the DNS server. Checking [Overwrite] enables dynamic updating of the data
in the DNS server database.

Generate Domain Search List Automatically
Check [Enabled] to create domain search lists automatically.

Domain Name 1-3
Used to enter the name of the domain to search (up to 255 characters).

Connection Time-Out
Sets the timeout period when searching for domains (between 1 and 60 seconds).
(Default: 1)

DNS Resolution via IPv6 First
Check [Enabled] to prioritize IPv6 for resolving DNS names when [IP mode] is set to [Dual
Stack]. (Default: On)
 [Apply] button
Press this button to confirm the entered settings.
Note • Reboot the machine to enable new settings.
SNMP Configuration (Connectivity > Protocols)
You can set the SNMP protocol.
 General

SNMP Port Status
You can check [Enabled] to use SNMP. (Default: On)

Edit SNMP v1/v2c Properties button
You can make advanced SNMP v1/v2c settings by pressing this button. (Default: On)
- Community Name (Read Only):
You can enter the community name to acquire (up to 32 ASCII code characters).
(Default: blank (public))
- Community Name (Read/Write):
You can enter the community name to acquire/write (up to 32 ASCII code characters).
(Default: blank (private))
-Trap Community Name:
You can enter the community name for trap notification (up to 32 ASCII code
characters). (Default: blank (SNMP_trap))
- System Administrator's Login ID:
You can enter information related to the person in charge of maintenance of the
machine (up to 127 ASCII code characters)(Default: blank).
 Authentication Failure Generic Traps
You can check [Enabled] to send an authentication failure trap notification when an access
attempt was made with an invalid community name not registered in the machine.
(Default: On)
 [Advanced] button
You can make the following settings by pressing this button:

[Add UDP IPv4 Address] button

Fuji Xerox DocuCentreS2520 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2520
Category	Printer
Language	English