10 CentreWare Internet Services
150
4. After changes have been made, click [Apply New Settings].
• To cancel any changes you have made, click [Restore Settings].
• To display the current machine settings, click [Refresh Status].
NOTE: Some settings will be available only after you restart CentreWare Internet
Services or after the machine is switched off and on.
Default User ID and Password
If the System Administrator mode is enabled in CentreWare Internet Services settings,
you will be prompted to enter the System Administrator user ID and password when
changes are made. The default user ID and password for the System Administrator are
"11111" and "x-admin", respectively. This ID and Password are default and can be
changed by the System Administrator.
Properties Features
The following table lists the items that can be set.
Some items may not be displayed depending on your machine configuration.
Feature Setting items
Machine Details Product Name
Displays the name of the product. This is a display-only item.
Serial No.
Displays the serial number of the machine. This is a display-
only item.
Name
Enter the name of the machine.
Location
Enter the location of the machine.
Contact Person
Enter the name of the System Administrator.
Administrator E-mail Address
Enter the e-mail address of the System Administrator.
Machine E-mail Address
Enter the e-mail address of the machine.
Comment
Enter a comment on the machine.
Configuration Memory
Displays the size of the memory installed, amount of
memory used for each protocol, and the size of PostScript
memory if installed.
Available Printer Language
Lists the printer languages used by the machine and their
versions.
Software
Displays the version of software installed on the machine.
Hard Disk
Lists the name, and total and free sizes of the volumes in the
hard disk.
Hardware
Lists the hardware installed and their status.
To Next Page
Loading...
Need help?
General
