Fuji Xerox Document Centre 286 series User Manual

18 Appendix
336
Advanced Settings
Paper Tray 103 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Manual feed
Sets the paper tray to be used for printing.
Coordinate
Rotation
104 0 (Default): 0 degree
1: 90 degree
Sets the paper orientation for printing.
Gradation Mode 105 1 (Default): Grayscale
2: Black pen
Sets the gradation mode.
Parameter Item No. Value
Auto Layout 106 0 (Default): On
1: Off
Selects whether aligning the position of the document and the
paper is to be done automatically or not.
Active Palette 107 0 (Default): Command
1: Panel
Selects whether to use a pen specified by command or set on
the panel.
No. of Prints 108 1–250 (Default: 1): 1–250
Sets the number of prints to be made.
Output Tray 109 0 (Default): Center Output Tray - Lower
1: Side Tray
2: Center Output Tray - Upper
80: Finisher Tray
Sets the output tray.
Parameter Item No. Value

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English