Fuji Xerox Document Centre 286 series User Manual

HP-GL/2 Emulation
335
HP-GL/2 Emulation
This section shows the parameter settings and explains the major features specific to
HP-GL/2 emulation.
HP-GL/2 Parameter Settings
The following tables show the basic and advanced parameter settings for HP-GL/2
emulation. For information on how to change parameter values, refer to HP-GL/2
Emulation in the Machine Status chapter on page 258.
Basic Settings
Parameter
Item No. Value
Document Size 101 99 (Default): Auto
100: Paper
0: A0
1: A1
2: A2
3: A3
4: A4
5: A5
10: B0
11: B1
12: B2
13: B3
14: B4
15: B5
Sets the document size created by a PC client. When Auto (99)
is specified, the document size is determined based on the
Scaling Mode setting (the item number 160).
Paper Size 102 99: Auto
101 (Default): A Size
3: A3
4: A4
5: A5
14: B4
15: B5
Sets the paper size to be printed. This can be set if the paper
tray setting is either “Auto” or “Tray 5 (Manual Feed)”. In
addition, settings can only be made for cut paper. When Auto
(99) is specified, the paper size is determined based on the
Scaling Mode setting (the item number 160).

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English