Fuji Xerox Document Centre 286 series User Manual

PDF
331
*: Not available for Simplified Chinese model.
**: Not available for Traditional Chinese and English model of Document Centre 286/
236 Series.
PDF
The following table shows the parameters and their values for PDF direct printing. For
information on how to change parameter values, refer to PDF in the Machine Status
chapter on page 259.
Netware Kit Allows you to access the network using the NetWare protocol.
Attention Light Emits light so you can tell from a distance when the machine
receives a document or an error occurs in the machine.
DADF** Automatically feeds multiple sheets of document for scanning.
(In the main body of the guide, DADF is referred to as
"document feeder".)
Component Description
Parameter Item No. Value
Print Sets 401 1–999 (Default: 1): Specify the number of print sets.
2 Side Print 402 0 (Default): Off
1: LEF Binding
2: SEF Binding
Specifies which edge of paper is to be bound for double-
sided printing.
Print Mode 403 0 (Default): Standard
1: Fast
2: High Quality
Selects the print mode.
Sort 404 0 (Default): Off
1: On
Sets whether to enable sorting.
Layout 405 0 (Default): Auto
1: Booklet
2: 2 Up
3: 4 up
4: 100%
Selects the output layout
Paper Size 406 0: Auto
1 (Default): A4
Sets the paper size.

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English