12 Setups
226
Attribute Type of Custom Item 1–3
Specify the attribute type of auxiliary search parameter 1–3.
Attribute Name of Custom Item 1–3
Specify the attribute name of auxiliary search parameter 1–3. The name specified here
will be displayed on the Address Book when [E-mail] is selected. For more information,
refer to Address Book on page 234.
Maximum Search Results
Specify the maximum number of addresses to be displayed as the result of searching.
This feature restricts the number of addresses to be searched and displayed. Select
the number in the range from 5 to 100.
Search Time-Out
Specify whether or not to set the maximum searching time (time-out time). If you select
[On], then select the time in the range from 5 to 120 seconds.
Other Settings
Use this feature to configure or change other machine settings for sending scanned
documents as e-mail attachments.
1. Select [Other Settings] on the
[E-mail/iFax Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Maximum E-mail Size
Specify whether or not to restrict the size of scanned data to be sent as e-mail
attachments. If you select [On], then select the maximum size of data in the range from
50 to 65535 KB.
Maximum Address Entries
Specify the maximum total number of To, Cc, and Bcc recipients of a single e-mail.
Select the number in the range from 1 to 100.
Auto Print Error Mail
Specify whether to print error notification mails automatically when e-mails are not
delivered due to an error.
Response to Read Receipts (MDN)
Specify whether to send the processing result to the host machine when an iFAX
document is received.
To Next Page
Loading...
Need help?
General
