Common Settings
179
1. Select [Common Settings] on
the [System Settings] screen.
2. Select the required option.
3. Select [Close].
Machine Clock/Timers
Use this feature to set the correct date, time, and other related values.
1. Select [Machine Clock/Timers]
on the [Common Settings]
screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Date
Set the current date. You can select from three date formats: Y/M/D, M/D/Y, and D/M/
Y. The date set here is printed on lists and reports.
Time
Set the current time. You can select a 12- or 24-hour display format. If you select [12
Hour Clock], the buttons for specifying AM or PM are displayed. The time set here is
printed on lists and reports.
Time Zone
Set the time difference from GMT.
Daylight Savings
With this feature enabled, the machine automatically adjusts the current time when the
summer time starts and ends. Specify the start and end dates of summer time periods.
NTP Time Synchronization
With this feature enabled, the Network Time Protocol (NTP) is used to synchronize the
time of the machine with that of the specified time server.
NOTE: If the time server connection fails, the machine uses its own time without
synchronization.
Connection to Time Server
Specify whether to disable or enable this feature.
To Next Page
Loading...
Need help?
General
