Network Settings
197
Reduce/Enlarge Presets
Use this feature to preset magnification buttons. These are displayed when you select
[Preset %] in the [Reduce/Enlarge] feature on the [Basic Copying] screen. If you
predefine frequently used magnifications, the original can be expanded or reduced,
quickly and easily.
The [Reduce/Enlarge Presets] screen consists of multiple pages.
1. Select [Reduce/Enlarge
Presets] on the [Copy Mode
Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
R/E Preset 1–7
Allows you to assign your choice of magnifications to each of the seven buttons within
the range of 25–400% by selecting from 25 options.
Network Settings
This screen allows you to change the default settings for the network configuration.
There are eight main setup options available. For more information, refer to the
following.
NOTE: Items shown in these setting screens may vary depending on a usage
environment.
For more information on network setups, refer to the Network Administrator Guide.
Port Settings – page 198
Protocol Settings – page 200
Machine E-mail Address/Host Name – page 201
POP3 Server Settings – page 202
SMTP Server Settings – page 203
Domain Filter – page 204
Remote Authentication Server Settings – page 204
Other Settings – page 205
1. Select [Network Settings] on the
[System Settings] screen.
2. Select the required option.
3. Select [Close].
To Next Page
Loading...
Need help?
General
