Machine Status
257
Print Mode
Allows you to change the default printer mode and emulation parameter settings.
PCL, HP-GL/2, and PDF emulation modes are available for the machine. For
information on KS/KSSM emulation modes, refer to the User Guide for the Korean
model. For information on the ESCPK emulation mode, refer to the User Guide for the
Simplified Chinese model.
1. Select [Print Mode] on the
[Machine Status] screen.
Off-line
Sets the printer mode to off-line.
On-line
Sets the printer mode to on-line.
PCL Emulation
Displays the [PCL Emulation] screen.
[PCL Emulation] Screen
Use this feature to set parameter values for PCL emulation, which allows you to print
documents without using print driver software on your PC.
For the list of emulation parameters and their values, refer to PCL Emulation in the
Appendix chapter on page 332.
1. Select [PCL Emulation] on the
[Print Mode] screen.
2. Enter the parameter item
number in the [Item No.] field
using the numeric keypad on the
control panel.
3. Select [Change Value] to
change the displayed value. Select [Confirm] if no change is required.
4. Enter the required value in the [New Value] field using the numeric keypad on the
control panel.
5. Select [Save].
To Next Page
Loading...
Need help?
General
