GE 469 Manual

GE Power Management 469 Motor Management Relay 4-9
4 SETPOINT PROGRAMMING 4.2 S1 469 SETUP
4
4.2.7 CLEAR DATA
These commands may be used to clear various historical data.
•
CLEAR LAST TRIP DATA
:
Clears the last trip data.
•
RESET MWH AND MVARH METERS
:
Resets the MWh and Mvarh metering to zero.
•
CLEAR PEAK DEMAND DATA
:
Clears the peak demand values.
•
CLEAR RTD MAXIMUMS
:
All maximum RTD temperature measurements are stored and updated each time a
new maximum temperature is established. This command clears the maximum values.
•
CLEAR ANALOG I/P MIN/MAX
:
The minimum and maximum analog input values are stored for each analog
input. These minimum and maximum values may be cleared at any time.
•
CLEAR TRIP COUNTERS
:
There are counters for each possible type of trip. This command clears these
counters.
•
PRESET DIGITAL COUNTER
:
When one of the assignable Digital Inputs is configured as Counter, this com-
mand presets the counter. If the counter is of the incrementing type, setting the preset value to 0 effectively
clears or resets the counter.
•
CLEAR EVENT RECORD
:
The event recorder saves the last 40 events, automatically overwriting the oldest
event. If desired, this command can clear all events to prevent confusion with old information.
y
CLEAR DATA
y
[ENTER] for more
CLEAR LAST TRIP
DATA: No
Range: No, Yes
RESET MWh and Mvarh
METERS: No
Range: No, Yes
CLEAR PEAK DEMAND
DATA: No
Range: No, Yes
CLEAR RTD
MAXIMUMS: No
Range: No, Yes
CLEAR ANALOG I/P
MIN/MAX: No
Range: No, Yes
CLEAR TRIP
COUNTERS: No
Range: No, Yes
PRESET DIGITAL
COUNTER: No
Range: No, Yes
CLEAR EVENT
RECORDER: No
Range: No, Yes
ENTER
ESCAPE
ð
ð
MESSAGE
ESCAPE
MESSAGE
ESCAPE
MESSAGE
ESCAPE
MESSAGE
ESCAPE
MESSAGE
ESCAPE
MESSAGE
ESCAPE
MESSAGE
ESCAPE

GE 469 Specifications

General

Brand	GE
Model	469
Category	Relays
Language	English