GE 469 Manual

4-10 469 Motor Management Relay GE Power Management
4.2 S1 469 SETUP 4 SETPOINT PROGRAMMING
4
4.2.8 INSTALLATION
These commands clear various informative and historical data when the 469 is first applied on a new installa-
tion.
RESET MOTOR INFORMATION
:
Counters for number of motor starts and number of emergency restarts can be
viewed in actual values. The 469 also learns various motor characteristics through motor operation. These
learned parameters include acceleration time, starting current, and starting thermal capacity. Total motor run-
ning hours may also be viewed in actual values. On a new installation or if new equipment is installed, all this
information can be reset with this setpoint.
RESET STARTER INFORMATION
:
The total number of starter operations can be viewed in actual values. On a new
installation or if maintenance work is done on the breaker or contactor, this accumulator can be cleared with
this setpoint.
y
INSTALLATION
y
[ENTER] for more
RESET MOTOR
INFORMATION: No
Range: No, Yes
RESET STARTER
INFORMATION: No
Range: No, Yes
ENTER
ESCAPE
ð
ð
MESSAGE
ESCAPE

GE 469 Specifications

General

Brand	GE
Model	469
Category	Relays
Language	English