NX-10 Expander Installation Guide
7
Preface
This is the NX-10 Expander Installation Guide. This document includes an overview of the products
and detailed instructions explaining:
• how to install and configure the additional components of your NX-10 system; and
• how to program the system.
To use this document effectively, you should have the following minimum qualifications:
• a basic knowledge of alarm systems and components; and
• a basic knowledge of electrical wiring and low-voltage electrical connections.
Read these instructions and all ancillary documentation entirely before
installing or operating this
product.
Note: A qualified installer, complying with all applicable codes, should perform whatever hardware installation is
required.
Safety terms and symbols
These terms may appear in this manual:
CAUTION: Cautions identify conditions or practices that may result in damage to the equipment or other property.
WARNING: Warnings identify conditions or practices that could result in equipment damage or serious personal injury.
References
For more information, refer to the following:
NX-10 Menu Structure
This menu structure provides a map of the NX-10 menu options, including those for all the additional
modules.
NX-10 Installers Manual
This manual contains detailed information about the NX-10 system, its basic components and their
installation and programming.
To Next Page
Loading...
Need help?
General
