HP XP P9500 User Manual

Table 45 How to Prepare the Configuration Files at Each Site (Delta Resync Configuration) (continued)
How to PrepareContentsFile Type
On the Secondary SiteOn the Local SiteOn the Primary Site
Not requiredNot requiredDefine a path setPath set definition file
• An inter-control unit
logical path from
the primary site to
the local site
• An inter-disk
controller logical
path from the
primary site to the
remote site
Not requiredDefine a path setNot required
• An inter-control unit
logical path from
the local site to the
primary site
• An inter-disk
controller logical
path from the local
site to the remote
site
Define a path setNot requiredNot required
• An inter-control unit
logical path from
the remote site to
the primary site
• An inter-disk
controller logical
path from the
remote site to the
local site
Not requiredNot requiredDefine a route listRoute list definition
file/Command
device definition file
• A route/command
device from the
primary site to the
local site
• A route/command
device from the
primary site to the
remote site
Not requiredDefine a route listNot required
• A route/command
device from the
local site to the
primary site
• A route/command
device from the
local site to the
remote site
Define a route listNot requiredNot required
• A route/command
device from the
remote site to the
primary site
• A route/command
device from the
remote site to the
local site
Transfer from theTransfer from theDefine a copy groupA Cnt Ac-S Z copy forCopy group
Defining a Delta Resync Configuration 165

HP XP P9500 Specifications

General

Brand	HP
Model	XP P9500
Category	Software
Language	English