HP XP P9500 User Manual

1. From the local host, define a path set for an inter-control unit logical path (Local -> Primary)
and an inter-disk controller logical path (Local -> Remote) or specify a path by using Remote
Web Console.
2. From the local host, create a route list (Local -> Primary and Local -> Remote).
3. From the local host, establish an inter-control unit logical path (Local -> Primary) and an
inter-disk controller logical path (Local -> Remote).
170 Configuration Definitions

HP XP P9500 Specifications

General

Brand	HP
Model	XP P9500
Category	Software
Language	English