FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 11-1
11: SD MEMORY CARD
This chapter provides an overview of the SD memory card, describes its specifications, and describes the functions that can use
the SD memory card.
SD Memory Card Overview
The FC6A Series MICROSmart CPU module is equipped with one SD memory card slot which can use a FAT16 formatted SD
memory card and a FAT32 formatted SDHC memory card.
Notes:
This manual does not distinguish between SD memory cards and SDHC memory cards, both are referred to as "SD memory card".
For accessing the SD memory card cover and for how to install or eject the SD memory card, see "Using an SD Memory Card" on page 3-30.
SD Memory Card Functions List
The functions that can use SD memory cards are as follows.
Function Overview Reference
Save Log Data
Specified device values can be saved to the SD memory card as CSV files using the DLOG
and TRACE instructions.
When using Plus CPU module, the SD memory card can be replaced while the DLOG and
TRACE instructions are being executed.
11-7
Recipe Function
Values that have been prepared in advanced can be batch written to specified devices
and specified device values can be batch read according to the state of a device.
11-8
Download from SD Memory Card
The user programs, program comments, and CPU module system software can be
downloaded to the CPU module using the SD memory card. The basic settings for MQTT
communication can also be downloaded to the CPU module.
11-27
Upload to SD Memory Card
The user programs, program comments, and CPU module system software written to the
CPU module can be uploaded to the SD memory card.
11-43
SD Memory Card Maintenance with
Data File Manager
The data on the SD memory card inserted in the FC6A Series MICROSmart SD memory
card slot can be managed and checked using Data File Manager. Data on the SD memory
card can also be saved to a PC or deleted.
11-48
To Next Page
Loading...
Need help?
General
