Rev. 2.0
Maintenance Guide
14-25
14-3-7. MOUSE/KEYBOARD Selector (40003281)
[Functions]
This MOUSE/KEYBOARD selector is intended
to switch between the keyboard and mouse
console.
[DIP-switch settings]
The DIP-switches have been set properly at the
delivery of the machine. When setting the board
in the control unit, check the DIP-switch settings.
( portions show the switch positions.)
Figure 14-3-7-1 MOUSE/KEYBOARD SELECTOR DIP-SW
[Meaning of LED]
There are no LEDs on the MOUSE/KEYBOARD selector.
[Adjustment items after replacement]
There are no particular adjustment items.
[Replacement procedure]
c Before starting the replacement work, always turn OFF the main power, main circuit
breaker, and main switch.
d Since the MOUSE/KEYBOARD SELECTOR is assembled into the PCB support located at
the lower portion of the control box, take out the PCB support and replace it.
e After the PCB support has been taken out, remove SL4030691SC (4 pcs.) to detach the
KEYBOARD/MOUSE selector (40003281).
f Replace the detached MOUSE/KEYBOARD selector with a new one and reassemble the
parts and components in the reverse order of disassembly.
SW-1 ：ON
SW-2 ：OFF
SW-3 ：OFF
SW-4 ：OFF
To Next Page
Loading...
Need help?
General
